1/4" MAGNETIC NUT DRIVER w/quick release hex shank
 * Good Quality!
* Quick release hex shank will save you time
* Fits all power drills, screwguns, cordless & magnetic drivers
* Sandblasted, chrome vanadium steel bits
* Precision-milled for snug fit
Finally, A Great Roofing Hex Driver -- OK, so I've b ... [... more]
$3.49
Amazon.com |
Lackmond DEMO10 911 Demolition Blades - Dry Cut - 10" ...
* 10" Diameter; 0.250" Width; 7/8" - 5/8" Bore
"911" series is a unique, multi-purpose blade. We designed this blade to cut through various roofing materials including stone, gravel, tar, fiber-glass, metal sheeting, an ... [... more]
Amazon.com |
Lackmond DEMO141 911 Demolition Blades - Dry Cut - 14" ...
* 14" Diameter; 0.250" Width; 1" Bore
"911" series is a unique, multi-purpose blade. We designed this blade to cut through various roofing materials including stone, gravel, tar, fiber-glass, metal sheeting, and resin fiber. ... [... more]
Amazon.com |
Lackmond DEMO5 911 Demolition Blades - Dry Cut - 5" ...
* 5" Diameter; 0.250" Width; 7/8" - 5/8" Bore
"911" series is a unique, multi-purpose blade. We designed this blade to cut through various roofing materials including stone, gravel, tar, fiber-glass, metal sheeting, and ... [... more]
Amazon.com |
022360 6 FT. ADJ ROOF FLASHING
mfr: WILLIAM H. HARVEY COMPANY DEKTITE ADJUSTABLE ROOF FLASHING Pipe flashing for corrugated roofing For pitch to 45 degrees Multi-size pipe sealing range Non-fading EPDM collar Rated 212 degrees F. continuous heat Approved for Type B installations 022360 ... [... more]
Amazon.com |
"NICHOLS WIRE" 450 THREADED ROOFING NAILS 1-3/4"
* 1-3/4"
* 7/16" head
* .145 ring shank
* 9 gauge
* Aluminum
"NICHOLS WIRE" THREADED ROOFING NAILS 1-3/4" 7/16" head .145 ring shank 9 gauge Flat neoprene washer For ribbed or corrugated roofing Aluminum
Binding : Misc.
EAN : ... [... more]
Amazon.com |
Lackmond DEMO7 911 Demolition Blades - Dry Cut - 7" ...
* 7" Diameter; 0.250" Width; 7/8" - 5/8" Bore
"911" series is a unique, multi-purpose blade. We designed this blade to cut through various roofing materials including stone, gravel, tar, fiber-glass, metal sheeting, and ... [... more]
Amazon.com |
Threaded Roofing Nails (2NFMPK) Bx/525
* 1-3/4"
* 7/16" head
* .145 ring shank
* 9 ga
* Flat neoprene washer
Sold as Bx/525. 1-3/4". 7/16" head. .145 ring shank. 9 ga. Flat neoprene washer. For ribbed or corrugated roofing. Aluminum. Box/525. Manufacturer's number: 2NFMPK. ... [... more]
$19.89
Amazon.com |
MK Morse CSM1280TSC Metal Devil 12" Thin Steel Cutting ...
* Used to cut ferrous metals under 1/8" without bending the cut edge including corrugated roofing, sheet metal, conduit, and steel studs.
* In laboratory tests, the Morse Metal Devil cut through 6" X 1/4" thick steel plate in less than 12 s ... [... more]
$249.00
Amazon.com |
MK Morse CSM67548TSC Metal Devil 6-3/4" Thin Steel ...
* Used to cut ferrous metals under 1/8" without bending the cut edge including corrugated roofing, sheet metal, conduit, and steel studs.
* In laboratory tests, the Morse Metal Devil cut through 6" X 1/4" thick steel plate in less than 12 s ... [... more]
$85.10
Amazon.com |
MK Morse CSM62556TSC Metal Devil 6-1/4" Thin Steel ...
* Used to cut ferrous metals under 1/8" without bending the cut edge including corrugated roofing, sheet metal, conduit, and steel studs.
* In laboratory tests, the Morse Metal Devil cut through 6" X 1/4" thick steel plate in less than 12 s ... [... more]
$83.50
Amazon.com |
MK Morse CSM65048TSC Metal Devil 6-1/2" Thin Steel ...
* Used to cut ferrous metals under 1/8" without bending the cut edge including corrugated roofing, sheet metal, conduit, and steel studs.
* In laboratory tests, the Morse Metal Devil cut through 6" X 1/4" thick steel plate in less than 12 s ... [... more]
$81.88
Amazon.com |
