Axle Cv-Boot Joint
In this episode, Weekend Mechanic Bruce Bonebrake services the front axles on a pickup truck. He explains and examines a failing CV-joint on one of the axles, replaces the damaged axle and installs a new CV-boot kit to give the second axle a ... [... more]
DIYnet |
APW by GCK Industrial HO8054 Front Wheel Drive Axle Shaft
 Perfect OEM fit on '96 Accord LX 5spd coupe Wow...can't beat it. $49.99 delivered for a part that my local Honda dealer said would be close to $750 (did include installation though). My daughter and I installed this axle in about 2 hours, and thus " ... [... more]
$49.99
Amazon.com |
Axle Cv-Boot Joint -- Parts Installation And Reassembly
The longer of the two boots is installed on the inboard joint. Place the small clamp on the axle-shaft, then install the boot. Secure the boot with the small clamp (figure H). The boot fits tightly onto the shaft, but avoid lubricating them. The ... [... more]
DIYnet |
Axle Cv-Boot Joint -- Problem Diagnosis
The problem: CV joints are critical in the operation of modern axles. If the boot surrounding the CV joint should become torn, road grime and debris can contaminate the joint and cause it to fail. Ignoring the problem could lead to further damage ... [... more]
DIYnet |
Axle Cv-Boot Joint -- Parts Removal
Depending on the make of your vehicle, it may be fairly challenging to remove the axle completely from the differential. You may have a few obstacles to overcome. Consult your vehicle's service manual for proper procedures. In our case, it was ... [... more]
DIYnet |
Saturday Mechanic - Replacing Front-Drive Axles
The wheels of your front-drive vehicle are connected to the transaxle via axles that have constant-velocity-type universal joints at each end. There is an inner and outer joint on the left and right axles. All else being equal, the outer joints ... [... more]
Popular Mechanics |
Saturday Mechanic - Replacing Front-Drive Axles
The wheels of your front-drive vehicle are connected to the transaxle via axles that have constant-velocity-type universal joints at each end. There is an inner and outer joint on the left and right axles. All else being equal, the outer joints ... [... more]
Popular Mechanics |
Go-Kart -- Chain And Axles
With the engine, clutch and chain installed, the chain can be adjusted by making minor adjustments to the placement of the engine. If the engine is moved all the way forward, the chain will be too loose and could come off the sprocket. If it is ... [... more]
DIYnet |
Warn 38815 Heavy Duty Front Outer Axle Shaft
Heavy Duty Front Outer Axle Shaft; Length 9.94 in.; 19 Spline; Passenger Side; Driver Side; - Reduces Possibility Of a U-Joint Cap Slipping Out - Machined To Accept A Full-Circle Retaining Ring - for CHEVROLET BLAZER Front Dana 44 Irregular Cover 1973-198 ... [... more]
$166.81
Amazon.com |
Ford Rear Axle Nut Wrench
Features and Benefits: Applications: 2003 - newer Ford F-250, F-350, and F-450 super-duty trucks with 10-1/2 rear axle 4-lug socket Same as Ford No. 205-448 Use with a 1/2 Drive ratchet or breaker bar
Binding : Misc.
MPN : OTC6601 [... more]
$67.95
Amazon.com |
Warn 38816 Heavy Duty Front Outer Axle Shaft
Warn Alloy Outer Axle, Jeep Wagoneer 1974-83 w/ Drum Brakes. Uses big 297x U-joints. 19 Spline & 9.72 Length. [... more]
$166.81
Amazon.com |
Warn 38809 Inner Axle Shaft
WARN INNER AXLE SHAFT -- Right, Alloy, 27 Spline, 15.82' Long, Machined To Accept A Full Circle Retaining Ring, Reduces Possibility Of A U Joint Cap Stripping Out, Not For Closed Knuckle Applications, Axle Shaft Measured From U-Joint Center To End Of ... [... more]
$234.90
Amazon.com |
