Walnut Display Stand -- Leg Pieces
In this episode of DIY Wood Works, host David Marks shows the major steps in the construction of a black-walnut display stand with glass shelves. The six-foot stand with open-frame design provides ample space for displaying your treasures or ... [... more]
DIYnet |
Three Wire Display Stand; Gibson Holders 3AC - White
 The 3AC is machine riveted to three heavy vinyl coated, steel wires for continuous firm tension. The 3AC is 7 1/2 in height, 3 3/4 wide, has a bend of 1 1/4 and has a 1" lip. The 3AC is adjustable, lightweight and compact for easy storage and ... [... more]
$2.35
Amazon.com |
Walnut Display Stand -- Wengae Accents And Beveled Edges
With all the bevel cuts made, the wengae caps can be attached to the legs using dowels for the joinery. To make certain that all of the holes are drilled properly, a doweling jig is used. The jig is made so that it can fit on both sides of the ... [... more]
DIYnet |
Walnut Display Stand -- Shelf Supports
A miter is not a particularly strong joint, so each corner will be reinforced using a triangular spline. Before cutting slots for the splines, however, the shelf-frames must first be glued together. With the frames glued together first, the ... [... more]
DIYnet |
Walnut Display Stand -- Finishing Touches
For this piece, a hand-rubbed tung oil finish was selected (figure D) to bring out the depth and beauty of the walnut grain. On a tall piece of furniture like this one, it's easiest to begin work at the bottom, and work your way toward the ... [... more]
DIYnet |
Walnut And Glass Display Stand
This open-frame display stand provides ample space to display your treasures and collectibles. Built using a simple frame and panel construction, the stand incorporates glass panels that provide an open, 360-degree view of the shelf contents. The ... [... more]
DIYnet |
2004 Concept Cars Highlights: July 2004 Cover Story
People call them "showcars." It's understandable because the general public's perception is that the carmakers build them just for car shows. And if a flashy, out-of-this-world car can bring flocks of people to a display stand, the crowd's ... [... more]
Popular Mechanics |
Cherry Corner-Shelf -- Legs And Assembly
Before gluing up the display stand, the legs are ebonized so that they will match the wengae accents. The cherry wood is darkened to give it the look of ebony using metal acid dye. This wood dye is available from woodworking supply stores. Dying ... [... more]
DIYnet |
Stationary Display Stand; Gibson Holders N6 - White
The N6 is the second largest display stand in the Gibson Holders' N-series standing 6" tall x 5.5" wide. Its solid construction and durable powder coated finish makes this display stand ideal for displaying heavier products. The front lip of ... [... more]
$2.25
Amazon.com |
Two Wire Display Stand; Gibson Holders 2A - Black
The 2A is a two-wire display stand. Manufactured with two vinyl coated, steel wires machine riveted together for firm tension. The 2A is 4 in height, 3 3/4 wide, and has a 1 1/2 bend. The 2A is adjustable, lightweight, and compact for easy storage and ... [... more]
$2.05
Amazon.com |
Set of Stationary Display Stand; 3 Each of the Gibson ...
This is a complete set of the Gibson Holders N-Series. There are 3 each of the following, the N3 is the smallest display stand in the N-series standing 3" tall x 3" wide. The N4 is 4 x 3.5, the N6 is 6 x 5.5 and the largest of the N-Series is ... [... more]
$25.00
Amazon.com |
Set of Stationary Display Stand; 3 Each of the Gibson ...
This is a complete set of the Gibson Holders N-Series. There are 3 each of the following, the N3 is the smallest display stand in the N-series standing 3" tall x 3" wide. The N4 is 4 x 3.5, the N6 is 6 x 5.5 and the largest of the N-Series is ... [... more]
$25.00
Amazon.com |
