Fix A Trash Compactor
Push the motor mount away from the power screw sprocket(s) to increase the tension on the drive chain or belt. Tighten the motor mount bolts and check the tension. You should have no more than 1/2 inch (12 mm) of flex. Loosen the bolts and ... [... more]
eHow |
Bike Part Accessories
Create a candleholder, chain frame and sprocket bookends with bike parts for a soft industrial look. Have a welder create the frame shape, and then add glass and a favorite picture. Use two sprockets welded at a 90 ... [... more]
Home and Garden Television |
Timing Chain Replacement -- Reassembly
With the new chain and sprocket installed, the final steps in this project is to reinstall the remaining parts that were removed earlier to access the timing chain. In some cases, new parts are installed. This portion of the project is ... [... more]
DIYnet |
Milwaukee 48-09-5051 Sprocket Nose Saw Bar 16 in.
 Milwaukee 48-09-5051 Sprocket Nose Saw Bar 16 in. Since its founding in 1924, Milwaukee has focused on a single vision: to produce the best heavy-duty electric power tools and accessories available to professional user. Today, the Milwaukee name stands ... [... more]
$14.63 (Save 39%)
Dyscern |
Spy Accessory for Sprocket
Decorative frost glass disk with center hole for lamp beam. Available in antique bronze, chrome, or satin nickel finish. Use with low-voltage MR16 lamp up to 75 watts (not included). For use with Sprocket head only. [... more]
$36.00
Y Lighting |
Mini-Bike Kit: Engine Installation
Once the engine is in position, the chain can be installed. The single length of chain is fed through the sprocket on the clutch, wrapped around the rear sprocket, then joined to form a loop using a master link (figure N). The master link ... [... more]
DIYnet |
Timing Chain Replacement -- Harmonic Balancer, Timing ...
With the crankshaft sprocket removed, we were able to observe the severe wear on the teeth of the sprocket (figure M). This illustrates why it's necessary to replace the gears and chain at the same time. If only the chain were replaced, the worn ... [... more]
DIYnet |
Go-Kart -- Chain And Axles
With the engine, clutch and chain installed, the chain can be adjusted by making minor adjustments to the placement of the engine. If the engine is moved all the way forward, the chain will be too loose and could come off the sprocket. If it is ... [... more]
DIYnet |
Divinely Divinci
I made templates for a 30-inch tall, gear inspired support piece, a 16-inch gear with sprocket, the flying machine wings, back reinforcement and spine, and other gears. If using templates, use an offset spatula to spread a 1/4-inch-thick layer of ... [... more]
Food Network |
Halo And Sprocket: Welcome To Humanity (Halo & Sprocket)
Share in the quirky fun as big-hearted Katie copes with the unlikely challenges of living with an all-powerful angel and a socially naive robot. Contains the critically acclaimed issues #1-4 of Halo & Sprocket, the special Free Comic Book Day story & ... [... more]
$12.95
Amazon.com |
Cloyes S289 Crank Sprocket
CRANK SPROCKET [... more]
$8.29
Amazon.com |
MTD LAWN MOWER PART # 713-0330 SPROCKET & HUB ASS
MTD Genuine part 713-0330 SPROCKET & HUB ASS
Binding : Misc. [... more]
$73.99
Amazon.com |
