Replacing A Garbage Disposer
Replacing a failed garbage disposer can seem daunting. There's the usual trepidation about electricity and water, the unfamiliar sink connection and enough drain fittings to make leaks a real possibility. Then there are the hassles of comparison ... [... more]
Popular Mechanics |
Bell Trap Drain Fittings
 * SIOUX CHIEF" PVC BELL TRAP DRAIN
* 6" x 6"
* Strainer not hinged to body
* Fits over 1-1/2" SCH 40 DWV pipe or inside 2" SCH 40 DWV pipe
* White
Molded-in bell in lid. Strainers are hinged to body. 1-1/2" fits over 1-1/2&qu ... [... more]
$7.99
Amazon.com |
Blanco 501-203 - Oval Single Bowl Drop-In or Undermount ...
Oval Single Bowl Drop-In or Undermount Stainless Steel Lavatory Sink Blanco Devon Bowl Depth: 8" Drain Opening: 1 1/2" Required Interior Cabinet Space (width): 20" Required interior cabinet space (depth): 24" Cutout Diameter: 18 1/8& ... [... more]
$510.00 (Save 40%)
eFaucets |
ProTech Systems FasNSeal FSDF4 4" Drain Fitting (300221)
ProTech Systems FasNSeal FSDF4 4" Drain Fitting (300221) FasNSeal® is a Special Gas Vent and Gas Vent Connector, made from AL29-4C® stainless steel and designed for use on natural gas or propane-fired appliances listed as Category II, III ... [... more]
$28.82 (Save 35%)
Dyscern |
ProTech Systems FasNSeal FSDF5 5" Drain Fitting (300222)
ProTech Systems FasNSeal FSDF5 5" Drain Fitting (300222) FasNSeal® is a Special Gas Vent and Gas Vent Connector, made from AL29-4C® stainless steel and designed for use on natural gas or propane-fired appliances listed as Category II, III ... [... more]
$34.07 (Save 35%)
Dyscern |
Thexton 3 Pc. Radiator Petcock Socket Set
The right tool for the job! 1/4 inch drive set includes a steel universal socket to fit radiators, engine blocks, storage tanks, etc. With an O-ring to hold a 7/8 inch wrench in place. Set also has a molded plastic socket to fit narrow wing plastic drain ... [... more]
$19.79
SHOP.COM |
Replacing A Garbage Disposer
Disposers fasten to the sink drain fittings in a number of ways--some use threaded plastic nuts, others large hose clamps--but the mounting-ring assembly shown here is the most common. To remove the disposer, support it from below and rotate the ... [... more]
Popular Mechanics |
ProTech Systems FasNSeal FSDF3 3" Drain Fitting (300220)
ProTech Systems FasNSeal FSDF3 3" Drain Fitting (300220) FasNSeal® is a Special Gas Vent and Gas Vent Connector, made from AL29-4C® stainless steel and designed for use on natural gas or propane-fired appliances listed as Category II, III ... [... more]
$25.89 (Save 35%)
Dyscern |
Elkay RLR12FB Lustertone Stainless Steel Sink
Elkay RLR12FB Lustertone Stainless Steel Sink For over 80 years Elkay has created high quality, innovative sinks and faucets that consumer's count on to deliver unprecedented levels of style and function. They offer the most extensive product line ... [... more]
$434.40 (Save 25%)
Dyscern |
Radiator Petcock and Wing-Nut Socket Kit
It should be finger tight, but radiator petcocks and other style drains are often too tight to be removed by hand. Pliers can damage the hardware. Use the right tool. This 1/4" drive set includes a steel universal socket to fit most drains on ... [... more]
$14.39 - $15.99
The Eastwood Company |
500-336 Bar Sink (Satin Stainless)
* 18 Gauge Stainless Steel.
* 18/10 ChromeNickel content.
* Required cabinet space: 18"
* Drain holes accept 31/2" U.S. drain fittings.
* Cutout size: 1615/16" diameter circle.
Satin stainless steel finish. Outer dimension:17-11/16in. Inner ... [... more]
$330.00
Amazon.com |
Square Grate, 12" Black
Made of highest quality structural foam polyethylene with UV inhibitor. May be used in turf or concrete applications such as lawn areas, walkways, patios and pool areas where effective surface water removal systems are required. Grates fit directly into ... [... more]
$21.99
Amazon.com |
