General Tools 17 Square Head Protractor
 * Ground stainless steel
* 6" adjustable protractor arm
* Permanently etched graduations for 0 to 180 degrees in opposite directions
* It has a 3-3/8" x 2" head
6" Adjustable Steel Protractor, Preferred By Machinists, Draftspeople, &am ... [... more]
$14.36
Amazon.com |
Starrett 827A Tooled Steel Edge Finder
* Work with flat, straight edges, shoulders, grooves, round work, studs, dowels, or center points and scribed lines
* Body and contacts are made of tool steel
Locates work surfaces easily, quickly and accurately.
Binding : Tools & Hardware
EAN : 00496 ... [... more]
$17.00
Amazon.com |
General Tools 444 Depth/Angle Gage
* 2-1/2" hardened steel base
* Conforms to government specifications GGG-G-17b
May also be used as protractor to measure 30, 45, or 60 right or left. The hardened, polished steel head measures 2-1/2" long by1/8" thick. The steel rule, readi ... [... more]
$21.50
Amazon.com |
Starrett 474 Screw Pitch Gage with 60 Degree Threads and ...
* 28 Leaves
* 4-80 TPI
* With Locking Device and 11 1/2 and 27 Pipe Thread Pitches
Narrow design blades permit use for internal and external screw threads. Features a locking device at each end to secure all blades for storage or position an individual bl ... [... more]
$28.00
Amazon.com |
Starrett 6 Screw Pitch Gage 60 Threads
* 30 Leaves
* 4-42 TPI
* With Locking Device
* 11 1/2 and 27 Pipe Thread Pitches
Narrow design blades permit use for internal and external screw threads. Features a locking device at each end to secure all blades for storage or position an individual blad ... [... more]
$27.50
Amazon.com |
Starrett 187 1/16"-1/2"x64ths Starrett Drill Gage
* Sizes: 1/16 - 1/2.
No. 187 , Jobbers' Drill Gage, 1/16-1/2"
Binding : Misc.
EAN : 0049659506778
MPN : 50677
UPC : 049659506778 [... more]
$60.95
Amazon.com |
Starrett 270 7/16-Inch by 6-1/4-Inch Taper Gage Inch and ...
* Made from quality tool steel 7/16" wide by 6 1/4" long
* Accurately tapered throughout its entire length
* One side graduated from .010" to .150"
* Reverse side graduated ffrom0.3mm to 4 mm
Made of quality tool steel 7/16" wide ... [... more]
$77.00
Amazon.com |
General Hardware 1/16 -1/2x64ths Ss General Drill Gage
* Sizes: 1/16 - 1/2 by 64ths, Stainless Steel.
* Description: Fractional size drills, 1/16 to 1/2 x 64ths Stain.
Made of heavy gauge steel, machined and ground to close tolerances. Hole sizes and decimal equivalents are permanently etched onthe face.
Bind ... [... more]
$6.99
Amazon.com |
Starrett 472 Screw Pitch Gage with 60 Degree Threads and ...
* 51 Leaves
* 4-84 TPI
* With Locking Device
* 11 1/2 and 27 Pipe Thread Pitches
Narrow design blades permit use for internal and external screw threads. Features a locking device at each end to secure all blades for storage or position an individual blad ... [... more]
$52.00
Amazon.com |
Starrett 267 1/16-1-1/16 Starrett Taper Gage
* Number of Leaves: 4.
* Range: 1/16 - 1-1/16 in 64ths.
Reads in thousandths of an inch. Made from spring tempered steel approximately .012" thick. STC-51290A has 8 leaves and measures 2-1/2" long. STC-51291K has 10 leaves and is 2-3/4" lon ... [... more]
$123.05
Amazon.com |
Starrett 827b.500"d.x200"dbl Hd Starrett Edge Finders
* Sizes: .500.
* Style: .200 & Pointed Contact.
* Type: Double End.
Locates work surfaces easily, quickly and accurately.
Binding : Misc.
EAN : 0049659530636
MPN : 53063
UPC : 049659530636 [... more]
$28.75
Amazon.com |
Mitutoyo 188-151 0.4-7.0mm M Mti Pitch Gage
* Type: Inch/Metric.
* Blades Included: 4, 4-1/2, 5, 5-1/2, 6, 7, 8, 9, 10, 11, 11-1/2, 12.
* Number of Leaves: 51.
Narrow design blades permit use for internal and external screw threads. Features a locking device at each end to secure all blades for sto ... [... more]
$67.00
Amazon.com |
