1969 Alfa Romeo: Rear Suspension Refurbishment
At this stage, the rear suspension and rear axle are complete. Rubber bushings in the control arms have been replaced. The differential (figure M) has been checked to make sure there are no bad seals or fluid leaks, and that the bearings are in ... [... more]
DIYnet |
Moog Chassis K90494 Lower Control Arm w/Ball
 Moog Chassis K90494 Lower Control Arm w/Ball [... more]
$130.10
Amazon.com |
Install And Mount The Faucet And Drain Assembly
Insert the drain housing through the drain hole from below, and screw the drain housing tightly to the flange. If the flange begins to rotate, hold it steady by inserting the plastic handle of your pliers. The fitting for the pop-up control arm ... [... more]
DIYnet |
Diagnosing And Repairing Wheel Vibration
Jack up the front wheels by the control arms, so they're off the ground, and support them with safety stands. Grasp each wheel, holding it first at the sides, then at the top and bottom. See if you can rock the wheel in and out and if you can ... [... more]
Popular Mechanics |
Diagnosing And Repairing Wheel Vibration
Jack up the front wheels by the control arms, so they're off the ground, and support them with safety stands. Grasp each wheel, holding it first at the sides, then at the top and bottom. See if you can rock the wheel in and out and if you can ... [... more]
Popular Mechanics |
Buy Sport Shocks
Decide what variety of shock absorber you want. The choice of shock absorbers include: MacPherson Struts, which combine the shock absorber in a part that also replaces the upper control arm and ball joint; strut cartridges, which are used as ... [... more]
eHow |
